1. The grounding system must be 2-4 x 1500mm x 35°. The
Laser Welding Machine should be 1 meter away from any humid areas near the house.
Then apply the wire three times; each time, use a 30mm flat steel rail to dig the connector to form a good grounding network.
2. After the surface connection is completed, accurately measure the grounding resistance of the grounding wire using a meter. The standard resistance for Laser Welding Machine is 3 to 5 ohms.
3. Display the information. After accurately measuring the resistance, connect one end of an RVV 2.0mm 2.0mm copper core cable to the wire end of the grounding network and plug it into the grounding hole of the power outlet used in the Laser Welding Machine.
